Whether you are a regular user or a weekend dealer, having the right tools is absolutely important. People who tend to ignore thinking of having the best dry cut metal chop saw are sure to end up lagging behind.
Only when you have the right piece of equipment, you will be able to have the best of the finished products. So, if you have not got one till now, consider purchasing a good one immediately.
A dry cut metal chop saw must be powerful enough to cut pipe, angle iron, conduit and more.
Why should you need a good dry cut metal chop saw?
Before you actually go to buy a dry cut metal chop saw, it is important to understand that why should you actually need it. Here are a few reasons:
Cut metal pieces:
The basic functionality of a chop saw is to cut metal pieces. It is not just used to cut thin sheets of metal, but it could also be used to cut the thicker pieces quite easily. Having a sharp edge is absolutely important in this context and that is what we focus upon!
Cut steel bars and pipes:
A metal chop saw is greatly used to cut pipes, bars and channels. Thus, its effective functioning is too important to ensure that they are cut to the required size. Without a sharp-edged metal chop saw, you cannot cut the elements quickly and thus, it will add more time to your overall task.
For construction works:
A metal chop saw is an essential tool during the construction works. An infrastructure site is sure to call for a good chop saw and without it, a lot of task will ultimately lag behind.
It is basically a kind of task where one needs to cut a lot of metal pieces into the same length. Hence, a metal chop saw makes sure that all the metal pieces are cut right into the same size.
Chop both ferrous and non-ferrous metals:
The best thing about this metal chop saw is that you can use it to cut both ferrous as well as non-ferrous metals. Its abrasive nature rotates at a high rpm which is powerful enough to cut the metals.
Therefore, we can say that this metal chop saw is an absolute fit for a hacksaw or a band saw. If you have any of the above-mentioned tasks in hand, make sure that you buy one immediately.
Top-Rated Dry Cut Metal Chop Saws Reviews
1. Evolution Power Tools EVOSAW380 15-Inch Steel Cutting Chop Saw
We have decided to keep this at the top of our dry cut metal chop saw because of its ability to cut metals with minimal heat and almost negligible sparks that don’t even require a coolant.
The 1800 watt and 15 amp motor with a higher torque gearbox is just apt to enhance the steel cutting performance.
It is considered to be one of the best products that could be used for even an industrial setting. Also, people who have used this product so far have said that this particular model gives a really amazing finish to the metals that are cut using it.
Presence of a deflection shield in order to make sure that none of the workers get injured due to the sparks emitted
A pull out collection tray to achieve a clean workshop
Horsepower: 2.4 RPM
A lot of customers of reported that this product might be good for occasional usage, but it is not at all a reliable tool if you are looking for a professional saw that cuts with precision.
2. DEWALT Metal Cutting Saw, 14-Inch (DW872)
One of the major reasons for which we have put this particular product in the list of dry cut metal chop saws is its ability to cut four times faster than the chop saws. It has an amazing blade functionality that cuts metals accurately.
Whether it is a ferrous or a non-ferrous metal that you are looking to cut, this machine is just apt for both of them. Besides, this metal cutting saw comes with specially designed carbide teeth that work absolutely amazing finished cuts.
Another wonderful reason for its popularity is the agronomic design of having a horizontal handle to allow the users to rest their wrists during long hours at work to avoid fatigue.
Presence of heavy-duty compression spring for higher durability
1300 No Load RPM for a greater performance
Arbor size 1 In which is quite flexible
Cutting Capacity 5-3/16 In which is great
Quite a lot of users have complained about its clamping system.
3. Evolution Power Tools RAGE2 Multi Purpose Cutting Chop Saw, 14-Inch
Evolution Power Tools RAGE2 Multi Purpose Cutting Chop Saw shows that it is now the high time when we should discard using those long back abrasive discs and purchase one with higher functionality.
It is so amazing in terms of his performance that it is able to cut pieces of metal, aluminum as well as wood with perfect finishing.
Thus, you can consider it to be effective for serving multiple purposes. It also reveals that 1 Multipurpose TCT blade is more important than 20 abrasive discs. Also, if you are a little bothered about the camping system of this model, it comes with a fast action swivel clamping mechanism which is really great and secure.
The high torque model gearbox is another added benefit to this product.
Absolutely versatile and durable, worth paying the money!
36-tooth tungsten carbide tipped blade
Though most customers say that this product is indeed great for the value, however, there still remains a few quality flaws that do bother a few of them.
4. PORTER-CABLE PCE700 15 Amp Chop Saw, 14″
When it comes to power and durability, this is one of the best in the list. That’s the reason we have put it in the list of the best dry cut metal chop saw. It is indeed excellent when it comes to serving durability.
The power-packed motor gearbox with Blade Diameter: 14″, Arbor Size: 1″, Wheel Diameter: 14″, Power Cord: 8ft enables the users to rely on its quick work accessibility potential.
Of course, the clamp it comes with is superb in offering the security it is meant for, but at the same time, it comes with a heavy-duty steel base which is particularly meant to offer stability to the users while cutting. Overall, it is a great product to use!
If you have been looking for a product that is great not just in terms of its functionality but at the same time, can offer an optimum amount of comfort to the one handling it. It comes with a Powerful 15 Amp, 3 3/8 max.
HP, 110V motor along with a 1450 RPM no-load speed motor gearbox that is perfect to serve its purpose for cutting 4 3/4in. round and 4 1/8in. square stock at a go! Well, that’s not just enough! It is also known for the smooth finishes that it gives and its potential to adjust up to 45 degrees in order to cut miters quickly.
There is a lock-off button that prevents accidental cutting
Long-lasting carbide-tipped blade
Perfect for cutting pipes, conduit and angular iron pieces
Heavy-duty aluminum base for the sake of stability
It is quite an expensive deal. There’s a lot more similar products available at the same price range.
6. Makita LC1230 12″ Metal Cutting Saw
Among the many products that are mentioned above, this is one of the most popular deals available in the market. So why do you actually expect it to stand up in the list of the dry cut metal chop saw?
Well, the reason behind it is its ease of use feature. It was really well when it comes to metal cutting applications and thus, give the smooth finish with an industrial edge to the pipes, conduits and angular iron blocks. The machine is powered by 15 amp motor that delivers 1,700 rpm.
All of them together offer an easy waste disposal methodology and a cleaner environment to work in.
Comes with a quick release vise that assures secure metal retention
Features of shaving collection tray for easy waste disposal
There is a lock of button to ensure that there is no accidental start of the machine until and unless the user is ready for it
Carbide tipped blade for easy and convent utility
D shaped handle for the comfort of the user and prevent fatigue
The guide blade is adjustable up to 0 to 45 degrees for easy mitre cutting
The product comes at a little expensive price than other similar products of its category.
7. Slugger by FEIN MCCS14 Metal Cutting Saw, 14″ Blade Diameter
We have kept this particular product in our list of the cut metal chop saw solely because of its amazing power. It offers a 2200 watt power and cuts the metal and wood pieces very quickly. It cuts at various angles through the wood and metal which is indeed one of its functionality of serving multiple purposes at the same time.
Coming to its merits, it is known for generating a lesser amount of heat than the cut-off saws. The aluminum base is greatly known for its durability and this too is greatly liked by the people around.
Although the product operates at a low speed, it has got a high torque which is more than enough for its smooth operation.
Capable to cut up to 5-1/8-inch material at a 90-degree angle as well as a 4-1/8-inch round material with a capacity to serve at a 45-degree angle
Contains the debris in the collection tray to prevent scattering the waste materials otherwise
Automatic retracting lower safety guard is also present to provide an additional safety
Customers say that the cuts are without burrs.
8. DEWALT D28715 14-Inch Quick-Change Chop Saw – Old Model
This product was particularly made in China and the best thing about this is its quick and accurate cross-cuts. That’s the reason we have put it here while mentioning the cut metal chop saws. Also, the operation technique is absolutely easy.
Hence, if you are actually looking for a product that functions along with maintaining the right amount of security, this is the one for you! The 15 amp motor is amazing and it functions really well. The portable and ergonomic design of the machine makes it even more appealing to the buyers.
Potent of offering accurate angular cuts at an adjust pivot of 45 degrees
Ergonomic design with a D shaped handle
Quick lock vise for an operational convenience
No load speed of 4000 rpm
Though most people say that it is a product worth the value you are paying for, a handful of them have still reported that the fence needs some improvement.
9. Evolution Power Tools RAGE4 7-1/4-Inch TCT Multipurpose Cutting Chop Saw
We have included this here among the best cut metal chop saws for its compact size and the portability that it offers. The best thing about this product is that it comes at an affordable price range yet makes absolutely no compromise in terms of its quality and functionality.
It offers absolutely no sparks that are virtually visible. Another amazing thing about this product is its ability to operate faster than even a hacksaw. Since it comes with a multi-purpose technology, it uses only a single blade to cut all sorts of metals, aluminum, steel, wood as well as plastic.
Produces virtually no sparks or burrs and a negligible amount of heat
Smooth finishing of the ferrous and non ferrous blocks that it cuts
0-45° cuts with an adjustable pivot that makes the operation easier and more flexible at the same time
Worth the price you are going to pay for it
The saw is great, but the arbor size is not up to the mark
10. Toolman Lion Tools 8350 14” 15A Power Tools Multi-purpose Cutting Metal Saw Chop Saw
The primary reason for which we count this product as one of our best cut metal chop saws is that it comes at a really affordable price range with the similar kind of functionality that other products from the category offers!
It comes with a 6.6-ft extra-long UL listed power cord and 15 amp motor of impact energy which is really amazing and powerful at the same time. It works amazingly well with just a single blade and is capable of cutting both ferrous and non-ferrous metals.
If you are looking for a metal chop saw for a regular usage, this could be a good deal to look at! Therefore, if you are looking for something that gives you no complain in terms of its usage, this would be a good investment to make.
Carbite teeth for offering the required amount of precision
Energy is superb with a 15 amp motor
Produces burr free cuts
Works great for a new welder as well as a pro
Quick release clamps which is another merit in terms of its flexibility
How to Choose a dry cut metal chop saw?
Choosing a tool is as important as choosing a dress when you go shopping. Just like you cannot go wearing a wrongly fitted dress, in the same way, you can never get a task done without having the right kinds of tools with you.
Hence, if you have not yet got one, ensure buying a product as early as possible. Here, we are supposed to talk about the major factors that you ought to look about while purchasing the cut metal chop saw:
Take a look at the blades:
Since the basic job of a metal chop saw is to cut the metal pieces, it is absolutely important to have one with the right set of blades. It is essential to understand that all the chop saws don’t come with a similar set of blades. Having an excellent blade means that it will cut your metal piece immediately, in just a few seconds. Also, it will be able to settle the task really fast and that too, with a higher accuracy.
It is generally ideal to get a metal chop saw with a strong motor but with a lower speed. This is because a motor with a higher speed will usually cause a lot of sparks but will tend to have a lower efficiency. As a result, it is always better to get one with a strong motor to enhance productivity.
Adjustable angle fence:
If you do not have a good adjustable angle fence, it will be really difficult for you to make precise angles and make the cuts. Thus, this is an essential factor to look at, so as to make sure that you are able to position the workpieces in a right way.
Buying Guide Of a dry cut metal chop saw
A buying guide for the best dry cut metal chop saw basically intends to put forward the things that you should look upon while purchasing the product. It is essential to purchase the right kinds of the tool when you are up for a task. Here are a few parameters to consider:
The job you have at hand:
First and foremost thing to do is to take a pause and think about the nature of the tasks you are supposed to do with this dry cut metal chop saw. Do not go blind headed and pick up anything that pops first on your buying list. Instead, you should be sure of the kind of work you are supposed to do and then decide which one to buy!
Frequency of usage:
Based on how often you are actually using it, you must be deciding the model or the rpm and power of the machine. If you are a regular user, you should definitely purchase a deal that is upto the mark. However, if you are going to take it out once in a weekend, there’s no point in wasting a huge sum of money on it.
This is certainly one of the most significant considerations to make! Whether you want a dry cut metal chop saw to meet your requirements that are at a high-end or you have got just a menial task to settle, you should decide the amount of money you should be paying for it.
The basic intention of a user guide is to help you understand how you can use this dry cut metal chop saw. Here is the one to help you how you can take a note of the entire setting and make sure that you are able to do all the jobs right:
Take a note of the blades:
Have a look at the blades of the dry cut metal chop saw you are using. Having the right blade is important and in case you don’t have it, you ought to make the alterations as required based on the metal you are cutting.
Position the machine right:
A huge percentage of your cutting is dependent on the precision you maintain. So, what should you do to make sure that your job is done precisely? In order to make sure that the metal pieces are cut accurately, you should be able to position the machine in the right way and for that, it is important to get one with adjustable angles. This, in turn, gives you the flexibility to be able to settle your tasks correctly.
Setup is important:
You should set up the metal shops or directly on your concrete by putting iron, plywood or cement beneath the same. This will prevent the sparks to leave a stain on the concrete you are using it on!
There could be times when you may need to work with your metal chop saw by sitting on the ground. This happens mostly when you have a long length of metal to cut or in cases when the material is heavy enough for you to be placed anywhere. Therefore, in such situations, you should place something flat and solid under the machine to support it and get the job done with greater efficiency.
Since sparks, debris and kurfs or the cuttings are ejected at a higher speed, projection of the metal piece near to the window or the wall in the right way is extremely crucial.
Top features Of a dry cut metal chop saw
When you are paying such a good amount for purchasing a dry cut metal chop saw, it is deliberately essential for you to understand the requirement of picking up a tool with the top features. Here are a few you should take a glance at:
Adjustable angle fence:
Since precision is absolutely important when you are handling a metal cutting task, it is a vital feature to look for! With an adjustable angle fence held with your machinery, you will be able to do things right as well as make it a good fit too, and thus, look for it during the purchase.
Since the name itself reveals its function, it is needless to mention! The primary task of these spark deflectors is to deflect the sparks from the surrounding people or objects and that’s what it is important for! An adjustable spark deflector will give you the freedom to make your adjustments as per your requirement.
It is important to wear proper protective gear when you are working with a tool that is useful as well as dangerous at the same time. Make sure that the product you are purchasing contains eye protection plate along with the metal blade guard.
Look at the warranty period:
When you are investing a good deal of money on the purchase, it is important to make sure that you are aware of the warranty period that the production house is offering to its customers. This will be particularly helpful in case you receive a defective item, or your machine runs out of functionality post-purchase.
Why Did We recommend Those dry cut metal chop saws?
We understand the priority of having the right tool while settling a task and thus, we have recommended using the above-mentioned products. We have done quite a lot of research before preparing this list so that we can come up with some of the best and effective models are currently available in the market.
While all the companies claim to offer the best of their products, we have created this list of 10 dry cut metal chop saws after doing our homework and market research in analyzing the best equipment with their own set of pros and cons.
Not just this, we have also taken note of different factors that one should look upon and never miss in making a purchase. These recommendations basically go on the basis of the best in terms of functionality as well as best on customer reviews at a competitive price edge.
Why You Should buy dry cut metal chop saws From Amazon?
Amazon is regarded as one of the best and most trusted E-Commerce platforms available worldwide. It contains a wide plethora of products ranging from A-Z. The best thing about Amazon is that you do not only get an opportunity to avail of the product based on your own convenience of time but at the same time, you can remain hassle-free about the delivery.
Also, you are able to go through the features that are listed right after the display of the product listed on the website. As a result, you are able to read along the lines of all the pros and cons before actually making the purchase.
The benefit of purchasing from Amazon does not end just over here. It allows you to make a comparison of all the different products that are available in the market based on your category of requirements and expectations from the same.
Having the dry cut metal chop saw is very essential and if you have not purchased one yet, do a little bit of research on your end or simply go through the products that we have listed above, and you are sure to be able to make up your mind.
As we have listed some of the best deals out there, it will be really easy for you to make a decision and ensure the purchase. Do let us know which one of them did you pick, and we would love to count your review about it!